Spectra T50e - Page 105

Chapter 4—Configuring the Library Configuring the Global System Settings
August 2017 User Guide—Spectra T50e Library
106
7. ClickSave.TheMailUsersscreenredisplays(seeFigure58on
page104).
8. Ifdesired,selectTestnexttothenewlyaddedmailrecipienttosenda
testemail.
9. RepeatStep5onpage105throughStep7onthispagetoconfigureor
modifyadditionalemailrecipients.
10. ClickMENUtoreturntotheConfigurationmenu.
Message Types Selectthetype(s)ofmessagesthatthemailusershouldreceivebyselectingone
ormoreofthemessagetypeslisted.
 Fatal —Anerroroccurredthatpreventsthelibraryfromcontinuingoperation.
Immediateattentionisrequired.
 Error —Anerroroccurredthatimpactstheoperationofthelibrary.Determine
thecauseoftheerrorandremedyassoonaspossible.
 Warning —Thelibrarydetectedconditionsthatmayimpactoperation.
Determinethecauseoftheproblemandremedyassoonaspossible.
 Informational —Activitiesthatgeneratesystemmessagesoccurred.
Notes:
 Selectingamessagetypeautomaticallysendsallmessagesofthattypetothe
recipientastheyaregeneratedbythelibrary.
 Ifnomessagetypeisselected,thelibrarydoesnotautomaticallysendan
emailtothemailuser.However,messagescanstillbesenttothemailuseron
anindividualbasiswhentracesordiagnosticsarerun.
 Donotselectmessagetypesfortheautosupport@spectralogic.commail
recipient.ThismailrecipientisonlyusedtoreceiveAutoSupportticket
requestsorASLandHHMfilesthataregeneratedbythelibrary.
For this field... Do the following...