Spectra T50e - Configure Barcode Reporting

Chapter 4—Configuring the Library Configuring Optional Library Settings
August 2017 User Guide—Spectra T50e Library
124
12. ClickRun tocopythesecuritycertificateandauthenticationkeytothe
librarywebserver.
Notes:  TheSSLkeysarenotstoredaspartofthelibrary
configuration.IfyoureplacetheSDcard,youwillhaveto
reloadthesekeys.
 TochangeorupdatetheSSLkeys,youmustfirstmanually
deletetheoldkeysfromtheLCM.ContactSpectraLogic
TechnicalSupportforassistance(see
ContactingSpectra
Logiconpage4).
Configure Barcode Reporting
Overview TheSpectraLogictapelibrariessupportbarcodedatastrings
consistingofastartcharacter;from1to16characters,including
alphanumericcharactersandanoptionalchecksumcharacter;andthestop
character.Quietzonesprecedeandfollowthestartandstopcharacters.
Bydefault,thelibrary:
 Expectsbarcodelabelswithchecksums(thatis,ittreatstheright‐most
characterasachecksumcharacter).
 Doesnotusethechecksumcharactertovalidatethebarcode.
 Reportsupto16charactersbutdoesnotreportthechecksumcharacter.
Notes:  BlueScale12.3.1increasesthenumberofbarcodedigitsthe
T50ecanrecognizeto16characters.PriortoBlueScale12.3.1,
thelibrarycanrecognize8characters,plusonechecksum
character.
 Withtheexceptionofthechecksum,thebarcodelabels
typicallyshowthehuman‐readablecharacterthateach
barcodecharacterrepresents.Thechecksumcharacterisnot
consideredhuman‐readable.