Spectra T50e - Allocate Slots and Drives

Chapter 6—Configuring and Managing Partitions Creating a Storage Partition
August 2017 User Guide—Spectra T50e Library
173
Select the Exporter for the Partition
Onedriveinthepartitionisdesignatedasthe“exporter”forthepartition.
Thisdrive providesthecontrolpathfortheroboticmotioncommandssent
fromthehosttotherobotics.
Note: Youcanuseanydriveyouplantoincludeinthepartitionasthe
exporter.
1. FromtheNameandMediaTypescreen,clickNext.TheExporterscreen
displaysalistofthedrivescurrentlyinstalledinthelibrary.
2. Selectthedrivethatprovidesthecontrolpathfortherobotics.
3. Ifyouneedtoconfigurethepartitiontoemulateadifferenttypeof
library,seeConfigureEmulationonpage131.
Figure 111 Select the exporting drive.
Select a drive to operate as
the exporter for the
partition. This drive relays
the robotic motion
commands from the host
to the robotics.