Spectra T50e - Chapter 15 - Maintaining the Drives; Determine Whether Cleaning Is Required

Chapter 15—Maintaining the Drives Cleaning a Drive
August 2017 User Guide—Spectra T50e Library
436
Determine Whether Cleaning is Required
Cleanthelibrary’sdriveswhenanyofthefollowingoccurs:
 Thedriveindicatesthatitneedscleaning(seeIdentifytheProblemon
page383)bysendingamessagetothestoragemanagementsoftware.
 TheSCDinformationontheDriveDetailsscreenforanLTOdrive
displaysaC.
 TheCleaningStatusontheDriveDetailsscreenindicatesthatthedrive
requirescleaning(seeFigure304onpage437).
Note: Inorderforthelibrarytomonitordrivestatus,thedrivemustbe
configuredinapartition.
UsethefollowingstepstousetheDriveDetailsscreentodetermine
whetheradriverequirescleaning.
1. Logintothelibraryasauserwithsuperuseroradministratorprivileges.
2. ClickMENU,thenselectConfiguration > DLM(orDrivesifMLMisnot
enabled).TheDrivesscreendisplays.
Figure 303 Click Details on the Drives screen.