Spectra T50e - Delete an Existing User; Configuring the Global System Settings; Access the Configuration Menu

Chapter 4—Configuring the Library Configuring the Global System Settings
August 2017 User Guide—Spectra T50e Library
99
Delete an Existing User
Usethefollowingstepstodeleteanexistinguser.
Note: Thelibraryrequirestheretobeaminimumofoneuserassigned
tothesuperusergroup.Youcannotdeletethelastmemberofthe
superusergroup.
1. Logintothelibraryasauserwithsuperuserprivileges.
2. Ifnecessary,clickMENUtodisplaytheMenuscreen.
3. ClickSecurity >EditUsers.TheEditUsersscreendisplayswithalist
oflibraryusernames(seeFigure53onpage97).
4. Locatethenameoftheuseryouwanttodelete,thenclickDeletenextto
thatuser’sname.
Whenthescreenrefreshes,theuserlistontheEditUsersscreenno
longerincludestheusernameyoujustdeleted.
CONFIGURING THE GLOBAL SYSTEM SETTINGS
Thissectiondescribeshowtomodifythelibrary’sglobalconfiguration
settings.Alloftheglobalsystemsettingsareaccessedthroughthe
Configurationmenu.
Access the Configuration Menu
1. Logintothelibraryasauserwithsuperuseroradministrator
privileges.
2. Ifnecessary,clickMENUtodisplaytheMenuscreen.
Important
If you delete the default users, make sure that you keep a record of at least one
superuser name and password.