Spectra T50e - Set the Date and Time

To Next Page

To Previous Page

Chapter 4—Configuring the Library Configuring the Global System Settings

August 2017 User Guide—Spectra T50e Library

103

Set the Date and Time

Usethefollowingstepstoconfigurethelibrary’ssystemclock.

Note: Thetimeshownonthestatusbardoesnotcontinuallyupdate.It

isupdatedbasedontherefreshrateyousetforthewebserver

(seeConfiguretheLibraryWebServerSettingsonpage107).

1. Logintothelibraryasauserwithsuperuseroradministrator

privileges.

2. Ifnecessary,clickMENUtodisplaytheMenuscreen.

3. ClickConfigurationtodisplaytheConfigurationmenu.

4. OntheConfigurationmenu,clickMore Options(downarrow)to

displayadditionalconfigurationoptions.

5. ClickDate & Time.TheDate&Timescreendisplaysshowingthe

methodcurrentlyselectedforsettingthedateandtime.

Note: ThevaluesintheDate&Timecountersdonotwrap.For

example,tochangethemonthfromDecembertoJanuary,click

andholdthe–buttontodecrementthemonth.

6. Usethe+and–buttonstosetthemonth,day,year,hour,andminuteto

display.

Note: Insteadofclickingthe+or–buttonmultipletimes,youcanclick

andholdthebuttontoadvancethroughtheavailablevalues.

7. ClickSave.

8. ClickMENUtoreturntotheConfigurationmenu.

Figure 57 Set the date and time for the library.

Other manuals for Spectra T50e