Spectra T50e - Gather Tools and Supplies

Chapter 2—Installing the Library Installing the Library
August 2017 User Guide—Spectra T50e Library
46
Gather Tools and Supplies
Obtainthefollowingtoolsandequipment:
 #2Phillipsscrewdriver,magneticrecommended
 Level(recommended)
Identify the Rack-mount Kit Components
Unpacktherack‐mountkitandidentifythecomponentslistedinthe
followingtable.
Component Use
Railassemblies
Qty=2
Supportthechassisintherack.Eachrailis
pre‐assembledandconsistsofthe
followingcomponents:
 Adjustableslider
 Rails(2)
M6screws
Qty=16(8each)
Attachtherailassembliestotherack.Size
useddependsonracktype.
 M6x8mm(smallshoulder)
 M6x8mm(largeshoulder)
Usethescrewswiththelargershoulderfor
rackswithsquareholes.
M5x12screws
Qty=2
Securethelibrarymountingbracketsto
therack.
Rail
Adjustable
slider
Front
Back
Shoulder