Spectra T50e - Enable and Configure MLM PreScan and PostScan

Chapter 6—Configuring and Managing Partitions Creating a Storage Partition
August 2017 User Guide—Spectra T50e Library
175
Allocate Slots and Drives
1. FromtheSpareDrivesscreen,clickNext.TheChambers &Drives
screendisplays.
2. Setthefollowingoptions.
Figure 113 Set the options in the Chambers & Drives screen.
For this option... Do the following...
Storage Click–and+asrequiredtosetthenumberofstorageslotstoassigntothe
partition.
Notes:
 Astoragepartitionmusthaveaminimumofoneslot.
 Slotsassignedtothecleaningpartitionareseparatefromtheslotsassignedto
astoragepartition.
 IfalloftheslotsinthelibraryarelicensedwithaCoDoptionkeyandyou
wanttouseacleaningpartitionbutdidnotyetcreatedit,subtractthe
numberofslotsyouwanttouseforthecleaningpartitionfromthetotal
numberofslotsavailabletobe
assignedtothestoragepartition.
 Ifyoudidnotlicensealloftheslotsinthelibrary,theslotsthatarenot
licensedareavailableforuseinacleaningpartition.