Spectra T50e - SPECTRA SKLM KEY MANAGEMENT

Chapter 10—Encryption and Key Management Accessing the Encryption Feature
August 2017 User Guide—Spectra T50e Library
285
Configure the User Mode (BlueScale Professional Only)
IfyouareconfiguringSpectraSKLMorBlueScaleEncryptionStandard
Edition,theUserModeoptiondoesnotapply.ProceedtoConfigurethe
SecureInitializationMode(BlueScaleOnly)onpage286.
IfyouareconfiguringtheBlueScaleEncryptionProfessionalEdition,use
thefollowingstepstosettheencryptionusermode.
1. FromtheEncryptionConfigurationscreen,clickConfigure.The
EncryptionUsersscreendisplays.
2. SelecteitherSingle User ModeorMulti-User Mode.
Figure 188 Select Single User Mode or Multi-User Mode.
With this mode... Accessing encryption requires...
Single User Mode Onlyoneencryptionpasswordcanbeconfiguredandonlyoneisrequiredto
accessallencryptionfeatures.
Multi-User Mode Threeuniqueencryptionpasswordstobeconfigured.Afteryousetupthethree
passwords,theyareusedasfollows:
 Enteranyoneofthethreetopermita libraryusingSecureInitializationmode
toinitializeencryptionwhenthelibraryisstartingupandtootherwiseaccess
mostencryptionfeatures,excludingexportandimportencryptionkey
features.
 Enteranytwoofthethreepasswords,whenprompted,toaccessexportand
importencryptionkeyfeatures.