Spectra T50e - Configure the Password

Chapter 10—Encryption and Key Management Accessing the Encryption Feature
August 2017 User Guide—Spectra T50e Library
284
ACCESSING THE ENCRYPTION FEATURE
Usethefollowingsectionstoaccesstheencryptionfeature toconfigurethe 
librarytouseeitherSpectraSKLMorBlueScaleEncryptionkeymanagement.
Log Into the Encryption Feature
User Privilege Requirements. Onlyuserswithsuperuserprivilegescan
accessandusetheencryptionfeatureonthelibrary.
1. Logintothelibraryasauserwithsuperuserprivileges,thenclick
MENU > SecuritytodisplaytheSecuritymenu.
2. ClickEncryption.TheEncryptionUserLoginscreendisplays.
3. Entertheencryptionpassword(ifoneisset)andthenclickOK.The
EncryptionConfigurationscreendisplaysthemonikerforany
BlueScaleencryptionkeyscurrentlystoredinthelibrary.
Notes:  Thedefaultencryptionpasswordisblank.
 Ifyouareconfiguringencryptionforthefirsttimeoryouare
usingSpectraSKLMkeymanagement,noencryptionkey
monikersdisplay.
 IfyouareusingBlueScaleProfessionalEdition,upto
30encryptionkeyscanbestoredinthelibrary.
Figure 185 Click Encryption to display the Encryption User Login screen.
Figure 186 Enter the encryption password to log into the
encryption feature.
Figure 187 The Encryption Configuration screen.
Click Encryption to
display the Encryption
User Login screen.