Spectra T50e - LOG INTO THE USER INTERFACE

Chapter 2—Installing the Library Log Into the User Interface
August 2017 User Guide—Spectra T50e Library
65
LOG INTO THE USER INTERFACE
Afterthepower‐onsequencecompletes,theLoginscreendisplays.
Note: Ifthesoftkeyboardisnotdisplayed,touchthekeyboardiconin
thelowerright‐handsideoftheLoginscreentodisplayit.
1. Usingthestylus,touchtheUsertextboxandusethesoftkeyboardto
typesu.
2. Leavethepasswordfieldempty,andtouchLogin.
Note: Ifthisisnottheinitiallogin,andyoupreviouslyestablished
passwords,enterthesuperuserpasswordbeforetouchingLogin.
3. Waitfortheinitializationprocesstocomplete.
4. Closethekeyboardbytouchingitsiconwiththestylus.
5. AccesstheGeneralmenuscreen.ReadChapter3–Introducingthe
BlueScaleUserInterface,beginningonpage72tolearnaboutusingthe
library’sBlueScaleuserinterface.
Figure 29 Use the soft keyboard to log into the library.
Touch Login
su
Type “su”
1
Wait
Close keyboard
2
3
4
Soft keyboard