Spectra T50e - Check the Currently Released Bluescale Version

Chapter 14—Maintaining the Library Updating the BlueScale Software and Library Firmware
August 2017 User Guide—Spectra T50e Library
419
9. ClickFinishtoreturntotheUtilitiesscreen.
10. Ifrequestedtodoso,sendthisinformationtoSpectraLogicTechnical
Support(seeContactingSpectraLogiconpage7)foradvanced
troubleshooting.
Check the Currently Released BlueScale Version
FollowthesestepstocheckthecurrentlyrecommendedBlueScaleversion.
Note: FiguresinthissectionshowtheSpectraTFinitylibrary.When
performingthesesteps,makesureyouselectT50e.
1. LogintoyouruseraccountontheTechnicalSupportportalat
support.spectralogic.com.
Note: SeeAccessingtheTechnicalSupportPortalonpage466for
informationaboutcreatinganaccountandaccessingthe
TechnicalSupportportal.
2. SelectDownloads > Product Software.
3. OntheProductSoftwarepage,locateyourlibrarytypeintheSpectra
Productcolumn.ThecurrentlyreleasedBlueScaleversionislistedinthe
Current Versioncolumn.
4. ComparetheCurrentVersionavailableforthelibrarytotheve rsion
installedonthelibrary.
Figure 290 The Product Software screen.