Spectra T50e - Enable MLM and Configure Settings

Chapter 8—Configuring and Using Media Lifecycle Management Enabling MLM and Configuring Global
August 2017 User Guide—Spectra T50e Library
237
Enable MLM and Configure Settings
UsethefollowingstepstoenableMLMandMediaAutoDiscoveryand
configuretheglobalsettingsforMLM.Thesesettingsaffectallpartitionsin
thelibrary.
Note: EnablingMLMautomaticallyenablesDriveLifecycle
Management(DLM)aswell.SeeChapter9–UsingDrive
LifecycleManagement,beginningonpage272forinformation
aboutDLM.
1. Logintothelibraryasauserwithsuperuseroradministrator
privileges.
2. ClickMENU,thenselectConfiguration > MLM.TheMLMSettings
screendisplays.
Figure 148 Use the MLM Settings screen to enable MLM and configure the
global configuration settings.
Click Enable Media Auto
Discovery if you want the
library to proactively
discover newly imported
cartridges and add them
to the MLM database.
Click Enable Media
Lifecycle Management to
enable the MLM and DLM
features.