Spectra T50e - Configure Log Set Forwarding

Chapter 11—Configuring and Using AutoSupport Configuring AutoSupport
August 2017 User Guide—Spectra T50e Library
337
7. ClickNext.TheAutoSupportAlarmsSummaryscreendisplays.
8. ClickSavetosaveyourchangesorclickCancel toreturntothe
AutoSupportscreenwithoutsavingyourchanges.
Afteryourchangesaresaved,theAutoSupportscreendisplays.
Configure Log Set Forwarding
Logforwardingisenabledbydefaultfromthefactory.Thisisamonthly
logsetthatisforwardedtoSpectraLogicfordatacollection.Noactionis
takenbySpectraLogicTechnicalSupportforaparticularlibrarywhenthe
logsetisreceived,butthedataisparsedandstoredinourdatabaseto
betterunderstandourfieldpopulationandhowthelibraryisusedand
howitcanbeimproved.
Note: ASLinformationisonlyfortroubleshootingpurposes.Thislog
informationisseparatefromthedatapathandcontainsno
customerdata.
1. Logintothelibraryasauserwithsuperuseroradministrator
privileges.
2. ClickMENU,thenselectMaintenance > AutoSupport.TheAutoSupport
screendisplays.
Figure 232 Review the AutoSupport Alarms Summary
screen.
Figure 233 Click Log Forwarding to configure log set
forwarding.