Spectra T50e - Configuring Bluescale Key Management; Create an Encryption Key

Chapter 10—Encryption and Key Management BlueScale Key Management
August 2017 User Guide—Spectra T50e Library
303
Configuring BlueScale Key Management
Thefollowingsectionsdescribetheconfigurationstepsforboththe
StandardandProfessionalEditionsoftheencryptionfeature.
Create an Encryption Key
1. Accesstheencryptionfeature(seeLogIntotheEncryptionFeatureon
page284).
2. OntheEncryptionConfigurationscreen,clickAdd Key.TheNew
EncryptionKeyscreendisplays.
3. EnteranamefortheencryptionkeyintheMonikerfield.Makesurethat
themonikermeetsthefollowingrequirements:
 Amonikercanbe anycombinationofthenumb ers0‐9,lowerand 
uppercasealphabeticcharacters(a‐zand A‐Z),andtheatsymbol(@),
dash(–),underscore(_),andperiod(.)characters.Toimprov e
readability,us eanunderscoretoseparatewords.Donotuseany
spacecharacters.
 Eachmonikermustbeauniquestringofcharactersthatwasnot
usedforanyotherencryptionkey.
Figure 196 Click Add Key to begin the key creation process.
Figure 197 Enter a unique moniker to create a new
encryption key.