Spectra T50e - Pause the Postscan Process

Chapter 8—Configuring and Using Media Lifecycle Management Using PostScan
August 2017 User Guide—Spectra T50e Library
255
Pause the PostScan Process
IfyouneedtoperformanyoftheoperationslistedinBackground
Operationsonpage234orifyouneedtoresetthelibrary,youcanpause
thePostScanprocess.Thelibraryreturnsanycartridgescurrentlybeing
scannedtotheiroriginallocations.
UsethefollowingstepsifyouneedtotemporarilypausethePostScan
process.
1. ClickMENU,thenselectMaintenance > MLM.TheMediaLifecycle
ManagementToolsscreendisplays.
Note: ThePause PostScanbuttonisonlypresentifthePostScan
processisrunning.
2. ClickPause PostScantopausethePostScanoperationforonehourso
thatyoucanusetheGlobalSpareorperformotherlibraryoperations.
Afteranhourpasses,thelibraryrestartsthePostScanoperationonthe
tapethatwasbeingverifiedatthetimeoftheinterruption,provided
thePostScanprerequisitesaremet(see
PrerequisitesforStartinga
PostScanOperationonpage247).
Important
Pausing PostScan affects all partitions that are configured to use PostScan.
Figure 159 Click Pause PostScan on the Media Lifecycle
Management Tools screen.