Spectra T50e - Page 256

Chapter 8—Configuring and Using Media Lifecycle Management Using PostScan
August 2017 User Guide—Spectra T50e Library
254
4. ClickNext.TheSelectTapesscreendisplays.
5. Selectthecartridgethatyouwanttocheckformediaerrors.
6. ClickAddtoaddtheselectedcartridgeorclickAdd All toaddallofthe
cartridgeslistedtothePostScanqueue.TheTapestoPostScanscreen
displays.
7. Ifyouwanttoaddadditionalcartridgestothelistofcartridgestobe
scanned,clickAdd Tapeandrepeat
Step4thoughStep6.
Note: Ifyouwanttoremoveoneormorecartridgesfromthelistof
cartridgesscheduledtobescanned:
 SelectthecartridgeandclickDeletetoremoveitfromthelist.
 ClickDelete Alltoremoveallofthecartridgesfromthelist.
8. ClickNexttoqueuetheselectedtapesforthePostScanprocess.The
PostScanprocessbeginswhenalloftheprerequisitesaremet(see
PrerequisitesforStartingaPostScanOperationonpage247).
9. ClickFinishtoreturntotheMediaLifecycleManagementToolsscreen.
Figure 157 Select the cartridges to be added to the PostScan
queue.
Figure 158 The Tapes To PostScan shows the cartridges
currently in the PostScan queue.