Spectra T50e - Connect a USB Device to the Library

Chapter 5—Operating the Library Using a USB Device
August 2017 User Guide—Spectra T50e Library
148
Connect a USB Device to the Library
TouseaUSBdevice,plugitintoeitheroftheUSBportsontheLCMand
allowtimeforthedevicetomount.
Notes:  NotallUSBdevicesarecompatiblewiththelibrary.Ifyou
areunabletoaccessaUSBdevicefromthelibrary,removeit
anduseadifferentone.Ifthelibrarystopsrespondingafter
youinsertanincompatibleUSBdevice,resetitasdescribed
inResettingtheLibraryonpage365.
 PlugtheUSBdeviceintotheLCMbeforebeginninga
procedurethatreadsorwritesdata,toallowtimefordevice
recognition.Formanyutilities,theoptiontoreadfromor
writedatatoaUSBdeviceisnotavailableifaUSBdevice
wasnotpluggedintotheLCMbeforeyouselecttheutility.
Figure 90 Plug the USB device into the LCM.
Plug in
USB device