Spectra T50e - Confirm and Save the Partition Settings

Chapter 6—Configuring and Managing Partitions Creating a Storage Partition
August 2017 User Guide—Spectra T50e Library
183
Confirm and Save the Partition Settings
Afteryoufinishconfiguringthestoragepartition,confirmandsavethe
settingstocompletethecreationprocess.
Note: IfyouwanttosavetheconfigurationtoaUSBdevice,connect
thedevicetotheUSBportontheLCM(seeConnectaUSB
DevicetotheLibraryonpage148)andallowtimeforthedevice
tomountbeforecontinuing.
1. FromthePartitionUsersorDriveIDsscreen,clickNext.TheSave
LibraryConfigurationscreendisplays.
2. Selectwhetheryouwanttosavethecurrentlibraryconfiguration.
 Don’t Save Library Configuration—Abackupofthechangedlibrary
configurationisnotsaved.
 Save Library Configuration To(highlyrecommended)—Savesa
backupofthelibraryconfigurationtotheselecteddestination.
Usingthisoptionishighlyrecommendedtoensurethatyoucan
easilyrestorethelibraryconfiguration,ifnecessary.
SelectwhethertosavethelibraryconfigurationfiletoUSBorto
emailittoanalready‐configuredmailrecipient(see
ConfigureMail
Usersonpage104).
Note: Donotusethedefaultautosupport@spectralogic.comemail
recipient.SpectraLogicdoesnotsaveemailedconfigurationfiles
unlesstheyarespecificallyrequestedfortroubleshooting.
Figure 119 The Save Library Configuration Screen.