Spectra T50e - Export Cartridges Using Bulk Unload

Chapter 7—Using Cartridges in the Library Exporting or Exchanging Cartridges
August 2017 User Guide—Spectra T50e Library
210
7. Ifyouareexchangingadifferentcartridgefortheoneyouremoved,
insertthenewcartridgeintheE/Eslot(seeFigure132onpage206).
Pushthecartridgeintotheslotuntilthelatchontheslotengagesthe
ridgesonthesideofthecartridge.
8. Waitforamessagepromptingyoutoclosetheaccessport.
9. Gentlypushtheaccessportclosed.
 Ifyouexchangedcartridges,thelibrarymovesthenewcartridgeto
theslotpreviouslyoccupiedbythecartridgeyouremoved.
 ThelibrarythenmovesthenextqueuedcartridgetotheE/Eslotand
openstheaccessport.
10. RepeatStep6throughStep9asthelibrarymoveseachofthequeued
cartridgestotheaccessport.Theprocesscontinuesuntilallqueued
cartridgesareexportedfromthelibrary.
Export or Exchange Cartridges Individually
Cartridgescanbeexportedorexchangedindividually,usingtheBlueScale
userinterface,aftertheyaremovedtotheE/Esloteithermanuallyorby
thestoragemanagementsoftware.IfthelibraryusesStandardejectmode,
whenthestoragemanagementsoftwareejectsacartridge,thelibrary
immediatelymovesthecartridgetotheE/Eslotandreportsthattheejectis
complete.
1. Useyourstoragemanagementsoftwaretoejectthedesiredcartridge
fromthelibraryormanuallymoveacartridgetotheE/Eslot(see
Move
CartridgesWithinaPartitiononpage219forinstructions).
2. ClickMENU,thenselectGeneral > Import/Export.TheImport/Export
screendisplaysshowinginformationforthelastpartitionthatwas
viewedoneithertheImport/ExportscreenortheInventoryscreen.
Important
The slot is keyed to only accept a correctly oriented cartridge. Do not force the
cartridge into the slot.
Important
Do not close the door before you are prompted to do so. Do not use force to push
the access port closed.