Spectra T50e - Page 213

Chapter 7—Using Cartridges in the Library Exporting or Exchanging Cartridges
August 2017 User Guide—Spectra T50e Library
211
3. Selectthepartitionyouwanttousefromthedrop‐downlist,thenclick
Go.TheImport/Exportscreenrefreshestoshowthecurrentstatusofthe
slotsassignedtotheselectedpartition.
Note: Ifthelibraryonlyhasonepartitionconfigured,theImport/Export
screenshowsthatpartitionanddoesnotincludeadrop‐downlist.
4. ClickOpen Door.Aprogressscreendisplaysdescribingtheprocess.
5. Insertafingerthroughtheopeninginthebackoftheaccessportand
carefullypushthecartridgeoutoftheE/Eslot.
6. Ifyouareexchangingadifferentcartridgefortheoneyouremoved,
insertthenewcartridgeintheE/Eslot(seeFigure132onpage206).
Pushthecartridgeintotheslotuntilthelatchontheslotengagesthe
ridgesonthesideofthecartridge.
Figure 136 Select the partition and then click Open Door to open the
access port.
Select partition
Click Open Door
Caution
Be careful not to drop or jar the cartridge when you remove it. Mishandling
cartridges can result in failures when you attempt to use the cartridge.
Figure 137 Remove the cartridge from the E/E slot.
Insert finger through
opening to push
cartridge out of E/E slot
Important
The slot is keyed to only accept a correctly oriented cartridge. Do not force the
cartridge into the slot.