Spectra T50e - UNPACKING THE LIBRARY

Chapter 2—Installing the Library Unpacking the Library
August 2017 User Guide—Spectra T50e Library
42
UNPACKING THE LIBRARY
Thelibraryanditscomponentsareshippedincardboardboxes.Theonly
toolyouneedtounpackthelibraryisapairofscissorsoraboxcutter.
Prepare the Unpacking Location
Settheboxesinalocationthatgivesyouadequateclearancearoundand
abovethemsothatyoucansafelyunpackthelibrary.Afterremovingthe
libraryfromitspackaging,moveittoaworkspacewhereyouhaveaccess
toallfoursides.
Unpack the Library
Savealloftheoriginalpackingmaterialsincaseyouneedtoshipormove
thelibrarylater.
Note: Makesurethatyouhaveaworkspaceareapreparedbeforeyou
removethelibraryfromitsshippingbox.
1. Openthelibraryshippingbox.
2. Removetherackmountingrails,theaccessories,andthe
documentationpacket,andsetthemaside.
3. Removetheprotectivefoamandtheplasticcoverfromthelibrary.
4. Liftthelibraryoutoftheboxandmoveittothelocationwhereitisto
beinstalled.Makesurethatyouhaveaccesstoallsidesofthelibrary.
WARNING
The library is heavy (see product specifications for details). Use extreme caution and
proper equipment when moving the library. Do not install components in the
library until it is secured in the rack.