Spectra T50e - Modify an Existing User

Chapter 4—Configuring the Library Configuring Library Users
August 2017 User Guide—Spectra T50e Library
98
5. CompletetheinformationontheNewUserscreen.
Note: Usernamesandpassw ordscancontainanycombinationofthe
numbers0‐9,low eranduppercasealphabeticcharacters(a‐zand
A‐Z),andtheatsymbol(@),dash(‐),underscore(_),period(.),
forw ardslash(/),andspacecharacters.Thereisnolimittothe
lengthbutthatwerecommendlengthsoflessthan2048characters.
6. ClickSave.Thenewusernameandgroupassignmentisaddedtothe
listofusersontheEditUsersscreen.
7. RepeatStep4throughStep6foreachadditionallibraryuser.
Modify an Existing User
Usethefollowingstepstochangethesettingsforanexistinguser.
1. Logintothelibraryasauserwithsuperuserprivileges.
2. Ifnecessary,clickMENUtodisplaytheMenuscreen.
3. ClickSecurity > EditUsers.TheEditUsersscreendisplayswithalist
oflibraryusernames(seeFigure53onpage97).
4. Findtheuser’sname,thenclickEditnexttothename.
5. Changetheuser’sname,password,group,oranycombinationofthese.
6. ClickSavetosaveyourchanges.
For this field... Enter...
User Thenamefortheuser.
Password
Retype Password
Apasswordfortheuser;retypethepasswordtoconfirm.
Notes:
 Forsecurity,thetextinthePasswordandRetype Password fieldsisshownas
asterisks
(*).
 Thoughhighlyrecommended,passwordsarenotrequiredforanyofthe
threeusertypes.
User Type Selectthegrouptowhichtheuserbelongs.
Note: SeeUnderstandingUserGroupsandSecurityonpage96for
descriptionsoftheusergroupsandprivilegesassociatedwitheach.
Important
If you set the passwords for the default users (su, operator, administrator), make
sure that you keep a record of the new passwords. If the default superuser is the
only user configured and you do not know the password, you are not able to access
the library or reset any forgotten passwords.