Spectra T50e - Accessing the Partition Wizard

Chapter 6—Configuring and Managing Partitions Accessing the Partition Wizard
August 2017 User Guide—Spectra T50e Library
164
ACCESSING THE PARTITION WIZARD
TheBlueScalePartitionwizardisusedtoperformallpartition
configurationoperations.Usethefollowingstepstoaccessthewizard
wheneveryouneedtocreateormodifyapartition.
1. Logintothelibraryasauserwithsuperuseroradministrator
privileges.Ifyouwanttoconfigureencryptioninthepartition,loginas
anencryptionuser(seeChapter10–EncryptionandKeyManagement,
beginningonpage282formoredetails).
2. TheGeneralStatusscreendisplays.ClickMENUtodisplaythemenu
screenthatwaslastviewed.
3. ClickConfigurationtodisplaytheConfigurationmenu.
4. ClickPartitionsontheConfigurationmenu.ThePartitionsscreendisplays.
5. ClickNeworEdittolaunchthepartitionwizard.
Figure 97 Click Partitions on the Configuration menu.
Figure 98 The Partitions screen with existing
partitions.
Figure 99 The Partitions screen with no existing
partitions.