Spectra T50e - Page 211

Chapter 7—Using Cartridges in the Library Exporting or Exchanging Cartridges
August 2017 User Guide—Spectra T50e Library
209
4. Selectthepartitionyouwanttousefromthedrop‐downlist,thenclick
Go.TheInventoryscreenrefreshestoshowthecartridgeinventoryfor
theselectedpartition.
Notes:  Ifthelibraryonlyhasonepartitionconfigured,theInventory
screenshowsthatpartitionanddoesnotincludeadrop‐
downlist.
 Thecartridgesthatwereejectedbythestoragemanagement
softwareareindicatedbyanasteriskintheInventoryscreen,
asshowninFigure134.
5. ClickProcess Queued Ejects.
Thelibrarycreatesamovequeuecontainingthecartridgestobe
exported,movesthefirstcartridgetotheE/Eslot,andopenstheaccess
port.
6. Insertafingerthroughtheopeninginthebackoftheaccessportand
carefullypushthecartridgeoutoftheE/Eslot.
Figure 134 Select the partition and then click Process Queued Ejects to begin
exporting the ejected cartridges from the library.
Select desired partition
and click Go
Click Process
Queued Ejects
Caution
Be careful not to drop or jar the cartridge when you remove it. Mishandling
cartridges can result in failures when you attempt to use the cartridge.
Figure 135 Remove the cartridge from the E/E slot.
Insert finger through
opening to push
cartridge out of E/E slot