Spectra T50e - Page 341

Chapter 11—Configuring and Using AutoSupport Configuring AutoSupport
August 2017 User Guide—Spectra T50e Library
338
3. ClickLog Forwarding.TheLogForwardingscreendisplays.
4. Selecttheforwardingoptionsyouwanttouse.
 Allow BlueScale to automatically send log setsisselectedbydefault.
Clearthecheckboxifyoudonotwantthelibrarytosubmitthe
monthlylogsetswhentheyaregenerated.
 Theautosupport@spectralogic.commailrecipientisselectedby
default.AllASLfilesgeneratedbythelibraryareautomaticallysent
toSpectraLogicTechnicalSupport.
 Selectanyadditionalmailrecipient(s)fromtheMail Tochoices
presented.Onlymailrecipientsthatwerepreviouslyconfiguredare
listed(see
ConfigureMailUsersonpage104).
5. ClickSave.
Afteryourchangesaresaved,theLogForwardingscreenredisplays
withaconfirmationmessage.
6. ClickPrevioustoreturntotheAutoSupportscreen.
Figure 234 Select the mail recipients who you want to
receive the automatically generated ASL files.