Spectra T50e - Prepare for the BlueScale Package Update

Chapter 14—Maintaining the Library Updating the BlueScale Software and Library Firmware
August 2017 User Guide—Spectra T50e Library
418
6. Ifyouwanttosavetheoutputfromtheutility,usethecheckboxesat
thetopofthescreentoselectthelocation;otherwiseskiptoStep7.
7. ClickRun.Afterabriefdelay,theUtilityResultsscreendisplaysthecurrent
componentfirmwareversions.Scrollasnecessarytoviewallofthedata.
Note: Youcandragthebottomrightcornerofthescrollboxcontaining
thecomponentfirmwareversioninformationtoadjustthe
lengthandwidthofthescrollbox.
8. IfyouchosetosavetheresultstoaUSBdevice,amessagedisplays
showingthefilenamefortheresults file.
Ifyouareconnectedtothelibraryusingawebbrowser,youcanalso
copyandpastetheresultsfromtheUtilityResultscreenintoatextfile
andemailittoSpectraLogicTechnicalSupportiftheyrequestit.
Selecting... Saves the output...
Send results to Mail
User
Asanattachmenttoanemailsenttothespecifiedmailrecipient.Usethedrop‐
downlisttoselecttherecipientforthereportfile.
Tosendtheemailwiththeoutputtosomeonewhoisnotalreadylistedasa
libraryuser,youmustfirstconfigurethatpersonasanemailrecipient(see
ConfigureMailUsersonpage104).
Note: Donotselectautosupport@spectralogic.comasarecipientunless
SpectraLogicTechnicalSupportspecificallyinstructsyousendtheoutputfrom
theutilitytothem.SpectraLogicdoesnotsaveemailedresultsfilesunlessthey
arespecificallyrequestedfortroubleshooting.
Save results to USB
key
ToaUSBdeviceconnectedtoaUSBportontheLCM.
Note: ThisoptionisonlyavailableifyouinsertedaUSBdeviceinStep2on
page417.
Figure 289 View the output of the View Firmware Versions utility.
Drag corner to
adjust size of
scroll box