Spectra T50e - Page 122

Chapter 4—Configuring the Library Configuring Optional Library Settings
August 2017 User Guide—Spectra T50e Library
123
2. TheBlueScalewebservermustuseanRSAprivatekeyandcannotuse
akeywithapassphrase.IftheprivatekeydoesnotincludeBEGIN RSA
PRIVATE KEY intheheaderorusesapassphrase,renamethekeyto
original_ssl.keyandissuethefollowingcommand.
openssl rsa -in original_ssl.key -out ssl.key
Ifthekeyhasapassphrase,issuingthiscommandpromptsyouforthe
passphrase.
3. Savethesecuritycertificatefile(ssl.crt)andtheprivatekey
(ssl.key)intherootfolderofaUSBdevice.
Note: Thesecuritycertificatefilemustbenamedssl.crt andthe
privatekeymustbenamedssl.key.
4. ConnecttheUSBdevicetoaportontheLCM(seeFigure14onpage44)
orthefrontpanelandwaitforthedevicetomount.
5. Logintothelibraryasauserwithsuperuseroradministrative
privileges(seeLogIntotheUserInterfaceonpage90).
6. Fromthetoolbarmenu,select Maintenance > Utilities > Show
Advanced.TheAdvancedUtilitiesConfirmationscreendisplays.
7. ClickYes.Thescreen refreshestoshowalistoftheadvancedutilities.
8. ScrollthroughthelistofadvancedutilitiesandselecttheLoad SSL
Certificate and Key from USButility.
9. ClickSelect odisplaytheDescriptionscreen.
10. ReadthedescriptionoftheutilityandthenclickNext.
11. Selectwhetheryouwanttoemailtheutilityresultsfiletoa
preconfiguredmailrecipientorsaveittoaUSBdevice.
Notes:  Theresultsfilejustindicateswhethertheutilitycompleted
successfully.ItdoesnotcontaintheSSLkey.
 Donotsendthefiletoautosupport@spectralogic.com.
Figure 70 Use the Load SSL Certificate and Key from USB utility
to load the security certificate onto the library.