Spectra T50e - Page 208

Chapter 7—Using Cartridges in the Library Importing Cartridges
August 2017 User Guide—Spectra T50e Library
206
6. Whentheaccessportopens,insertthecartridgeintotheE/Eslot,
smoothsideupandwiththebarcodelabelfacingout.Pushthe
cartridgeintotheslotuntilthelatchontheslotengagestheridgeson
thecartridge.
7. Waitforamessagepromptingyoutoclosetheaccessport.
8. Gentlypushtheaccessportclosed.
Thelibraryscansthecartridgebarcodelabelandupdatesitscartridge
inventorytoindicatethattheimportedcartridgeisintheE/Eslot.
9. ClickMENU,thenselectGeneral > Inventory.TheInventoryscreen
displaysshowingtheimportedcartridgeintheEEslot.
Important
The slot is keyed to only accept a correctly oriented cartridge. Do not force the
cartridge into the slot.
Figure 132 Insert the cartridge into the E/E slot.
Barcode label
facing outward
Important
Do not use force to push the access port closed, and do not close the door before
you are prompted to do so.
Figure 133 Select the cartridge in the EE slot.