Spectra T50e - Page 223

Chapter 7—Using Cartridges in the Library Using the Cartridge Inventory
August 2017 User Guide—Spectra T50e Library
221
Create a Move Queue
1. Fromtheoperatorpanel,logintothelibraryasauserwiththe
appropriateprivileges(seeUserPrivilegeRequirements,above).
2. Displaythecartridgeinventoryforthedesiredpartition(seeViewthe
CartridgeInventoryforaPartitiononpage217).
3. Selectthesourceforthemove.
 Tomoveacartridgefromonelocationtoanother,locateandselect
thecartridgeyouwanttomove(seeLocateaSpecificCartridgeon
page218).
 Toimportacartridgeusingtheaccessport,selectAccess Portasthe
source.
Notes:  TheAccess Portisonlyincludedontheinventorylistwhen
youaccesstheuserinterfacefromthefrontpanel.
 IftheE/Eslotcontainsacartridge,EE Slotandthebarcode
labelofthecartridgeitcontainsappearontheinventorylist
insteadofAccess Port.
 Ifoneofthepartition’sdrivescontainsacartridge,thatdrive
isincludedinthelist.
 Cleaningcartridgeshavean*(asterisk)nexttotheslot
numberifthecartridgeisexpired.
 Ifamovequeueisalreadydefined,theInventoryscreen
includesaView Move Queuebuttonwhichimmediately
displaystheMoveQueuescreenwithoutneedingtogo
throughtheprocessofconfiguringamovequeue(see
Figure146onpage223).
Figure 143 Select the cartridge you want to 
move.
Figure 144 Select the expired cleaning
cartridge to exchange.