Spectra T50e - Page 269

Chapter 8—Configuring and Using Media Lifecycle Management Managing the MLM Database
August 2017 User Guide—Spectra T50e Library
267
10. ClickNext.Ifyouwanttosavethesystemmessageshowingtheresult
oftheutility,selectthedestination.
Note: Thisscreenonlyrelatestothesystemmessagesindicatingthat
theutilitycompletedsuccessfully(orfailed).Theydonotrelate
totheMLMdatabasefileitself.
11. ClickRun.
Afterabriefdelay,theUtilityResultsscreendisplays,showingthatthe
databasefilewaseithersavedorsent.
Figure 170 Click Run to save the MLM database to the
specified destination.
Selecting this
option...
Saves the results system message...
Send results to Mail
User
Asanattachmenttoanemailsenttothespecifiedmailrecipient.Usethedrop‐
downlisttoselecttherecipientforthereportfile.
Onlypreviouslyconfiguredmailusersarelisted.Tosendtheemailtosomeone
whoisnotlisted,exittheutility,configurethatpersonasanmailuser(see
ConfigureMailUsersonpage104),andthenruntheutilityagain.
Note: Donotselectautosupport@spectralogic.comasarecipientunless
SpectraLogicTechnicalSupportspecificallyasksyoutosendtheresultsto
them.SpectraLogicdoesnotsaveemailedfilesunlesstheyarespecifically
requestedfortroubleshooting.
Save results to USB
key
ToaUSBdeviceconnectedtotheUSBportontheLCM.
Note: ThisoptionisonlyavailableifyouinsertedaUSBdeviceinStep3on
page263.