Spectra T50e - Viewing and Saving a Detailed Drive Health Report

Chapter 9—Using Drive Lifecycle Management Monitoring Drive Health Using DLM
August 2017 User Guide—Spectra T50e Library
274
SelectingDLMfromtheConfigurationmenudisplaystheDrivesscreen,
whichuseshealthiconstoprovideat‐a‐glanceinformationaboutthe
healthofeachdriveinthelibrary.FromtheDrivesscreenyoucanaccess
detaileddrivehealthreportsforeachdriveinthelibrary,aswellasdrive
managementtools.
EachbuttonontheDrivesscreenletsyouperformadditionaloperations.
Figure 177 Use the health icons on the Drives screen for at-
a-glance monitoring of drive health.
This button... Lets you...
Drive Traces CollectdrivetracesforLTO‐5andlatergenerationdrives(seeUsetheDrive
TracesButtononpage395).
Details Viewdetailedinformationabouttheselecteddrive(seeViewingandSavinga
DetailedDriveHealthReportonpage277).
Remove
Replace
Add
Removeorreplaceadrivethatisalreadyinthelibrary(seeAddingor
ReplacingaDriveonpage456).UseAddtopoweronthedriveinstalledinthe
drivebayandinitializeitinthelibrary.
Notes:
 TheRemove,Replace,andAddbuttonsareonlypresentifyouareaccessing
theBlueScaleuserinterfacefromthelibrary’soperatorpanel.
 TheAddbuttonisonlypresentifthedrivebayisnotconfiguredtocontaina
drive.