Spectra T50e - BlueScale Key Management

Chapter 10—Encryption and Key Management Spectra SKLM Key Management
August 2017 User Guide—Spectra T50e Library
290
4. TheSpectraSKLMServerConfigurationscreendisplaysaneditablelist
ofconfiguredSpectraSKLMservers(ifany).Entertheappropriate
informationfortheserveryouwanttoconfigure.
a. EntertheIPaddressoftheserver.
Note: Ifaserverisnolongerneeded,simplydeleteitsIPaddress.
b. Ifdesired,modifytheport.Thedefaultportsettingis3801.
Note: IfyouaresettingupSpectraSKLMonaWindowsserver,you
mustaddaWindowsfirewallruletoallowconnectionstothis
port.Otherwise,thelibraryisnotabletoaccesstheserver.
ClickUpdatetoacceptthechanges,anddisplaytheSpectraSKLMUpdate
ResultscreenorclickCanceltoreturntotheSpectraSKLMServ erStatus
screenwithoutsavingthechanges.
5. IfyouselectedUpdate,thelibraryattemptstoconnecttotheserverand
theSpectraSKLMUpdateResultscreendisplaysthesuccessorfailure
oftheSpectraSKLMserverconfiguration.

6. ClickOKtoreturntotheSpectraSKLMServerStatusscreen.
Note: Newlyaddedserversareaddedtothelistofserversonthe
SpectraSKLMServerStatusscreen.Ifthelibrarycouldnot
connecttotheserverorverifyitasaSpectraSKLMserver,it
doesnotappearonthelist.
Figure 193 Click Update to save the changes.
Figure 194 The SKLM Server Update Result screen.