Spectra T50e - CAPTURING TRACES

Chapter 12—Library Troubleshooting Troubleshooting Encryption Issues
August 2017 User Guide—Spectra T50e Library
355
System message
states that a tape
drive requires a
specific moniker.
Thecartridgewas
encryptedusingan
encryptionkeythatisnot
currentlyavailableonthe
library.
Or,ifyouareusing
BlueScaleProfessional
Edition,therequired
encryptionkeyisavailable,
butwasnotselectedasone
ofthepartition’s
decryptionkeys.
DependingonwhichBlueScaleEncryption
editionyouareusing,usethefollowingstepsto
enablethecartridgetoberead:
BlueScaleStandardEdition
1. Logintothelibraryasasuperuser.
2. Logintotheencryptionfeature.
3. Exportandthendeletetheencryptionkey
currentlylistedontheEncryption
Configurationscreen(see
Deletingan
EncryptionKeyfromtheLibraryonpage322).
4. Importtherequiredencryptionkey(see
ImporttheRequiredKeyIntotheLibraryon
page318).
5. SelectConfiguration > Partitions.
6. ClickEditnexttothepartitioncontainingthe
cartridge.
7. NavigatethroughtheBlueScalepartition
wizardtotheEncryptionscreen.
8. Selecttheencryptionkeytobeassociatedwith
thepartition.
9. ClickNexttoproceedtotheSummaryscreen
ofthePartitionWizard,andclickSave.
BlueScaleProfessionalEdition
1. Logintothelibraryasasuperuser.
2. Logintotheencryptionfeature.
3. Makesuretheencryptionkeyislistedonthe
EncryptionConfigurationscreen.Ifitisnot
listed,addthekeytothelibrary(see
Import
theRequiredKeyIntotheLibraryon
page318).
4. SelectConfiguration > Partitions.
5. ClickEditnexttothepartitioncontainingthe
cartridge.
6. NavigatethroughtheBlueScalepartition
wizardtotheEncryptionscreen.
7. Selecttherequiredencryptionkeyaseitherthe
primaryencryptionkeyorasadecryptionkey.
Note: Amaximumofeightdecryptionkeyscan
beassignedtoonepartition.
8. ClickNexttoproceedtotheSummaryscreen
ofthePartitionWizard,andclickSave.
Issue Cause Resolution