Spectra T50e - Page 366

Chapter 12—Library Troubleshooting View Hardware Health Monitoring (HHM) Data
August 2017 User Guide—Spectra T50e Library
363
8. ClickNext.TheDestinationsscreendisplays.
9. Ifyouwanttosavetheoutputfromtheutility,usethecheckboxeson
theDestinationsscreentoselectthelocation;otherwiseskiptoStep10.
Figure 248 Select the destination for the output of HHM:
View Data utility.
Selecting this
option...
Saves the report...
Send results to Mail
User
Asanattachmenttoanemailsenttothespecifiedmailrecipient.Usethescroll
listtoselecttherecipientforthereportfile.
Onlypreviouslyconfiguredmailrecipientsarelisted.Tosendtheemailwith
theattachedHHMreporttosomeonewhoisnotlisted,exittheutility,
configurethatpersonasamailuser(see
ConfigureMailUsersonpage104),
andthenruntheutilityagain.
Note: Donotselectautosupport@spectralogic.comasarecipientunless
SpectraLogicTechnicalSupportspecificallyinstructsyoutosendtheHHM
reporttothem.SpectraLogicdoesnotsaveemailedHHMreportfilesunless
theyarespecificallyrequestedfortroubleshooting.
Save results to USB
key
ToaUSBdeviceconnectedtotheUSBportontheLCM.
Note: ThisoptionisonlyavailableifyouinsertedaUSBdeviceinStep4on
page361.