Spectra T50e - Page 372

Chapter 12—Library Troubleshooting Restoring the Library Configuration
August 2017 User Guide—Spectra T50e Library
369
Restore the Library
Usethefollowingstepstorestorethelibraryconfiguration,theMLMand
DLMdatabases,andanyBlueScaleencryptionkeysusinganautomatically
generatedconfigurationbackupfile.
Note: Ifyoucannotusetheautomaticallygeneratedconfiguration
backupfilestoredinthelibrary,locateanAutoConfiguration
SavefilethatwassavedtoaUSBdeviceorsentasanemail
attachment.
1. Ifyouplantorestoreusingthezipfilecontainingtheautomatically
generatedconfigurationbackupfilethatwassentasanemail
attachment,usethefollowinginstructionstocopyittoaUSBdevice;
otherwise,skiptoStep2.
a. Createafoldercalled\autocfgsaveonaUSBdevice.
b. Copythezipfileyoureceivedintheemailtothe\autocfgsave
folderontheUSBdevice.
c. ConnecttheUSBdevicetotheUSBportontheLCMandallowtime
forthedevicetomountbeforecontinuing.
2. Logintothelibraryasauserwithsuperuseroradministrator
privileges.
3. ClickMENU,thenselectMaintenance > Utilities.TheBasicUtilities
screendisplays.
4. ClickShow Advanced.AConfirmationscreendisplays.
Important
The library cycles power after restoring the previous configuration.
Figure 252 Click Show Advanced on the Basic Utilities
screen.