Spectra T50e - Page 426

Chapter 14—Maintaining the Library Updating the BlueScale Software and Library Firmware
August 2017 User Guide—Spectra T50e Library
423
6. TheSelectPackagescreendisplays,listingthefilenamesforthe
availableBlueScalepackages.
Note: ThefilenamesbeginwiththeBlueScaleversionnumber,
followedbythedateofreleaseinYYYYMMDDformat.
7. SelecttheBlueScalepackage.
Note: IfthePackagedoesNOTdisplayintheUSBorPackageserver
section,youmayhavedownloadedthepackageforthewrong
librarytypeorthewrongsigned/unsignedpackagetype.
BlueScalepackagesmaybefoundonthesourcesdescribedinthetable
below.
Figure 293 Select the BlueScale package.
Source Description
Spectra Logic SelectanddownloadthedesiredBlueScalepackagefromSpectraLogic’s
packageservertothememorycardintheLCMandtheninstallit.
Notes:
 ThelibrarymusthaveaconnectiontotheInternetbeforeyoucanusethis
option(see
ConfigureNetworkSettingsonpage100).
 IfdirectedtodosobySpectraLogicTechnicalSupport,updatetheIPaddress
andpackagedirectoryfortheSpectraLogicpackageserver(see
Configurea
PackageServeronpage127).
Memory Card SelectthedesiredBlueScalepackagefrompackagesalreadystoredonthe
memorycardintheLCM.
USB Device SelectthedesiredBlueScalepackagefrompackagesstoredonaUSBdevice.
ThereisabriefdelaywhilethelibraryaccessestheUSBdevicewhenyouselect
thisoption.
Notes:
 TheUSB Device optionisonlyavailableifyoupreviouslyconnectedaUSB
devicecontainingtheBlueScalepackagetoaUSBportontheLCMin
Step2
onpage422.
 TheBlueScalepackagemustbestoredintherootdirectoryoftheUSBdevice.
 TheUSBdevicemustbeFAT‐formatted,notNTFS‐formatted.