Spectra T50e - Page 68

Chapter 2—Installing the Library Confirm the Current BlueScale Software Version
August 2017 User Guide—Spectra T50e Library
68
4. OntheProductSoftwarepage,locateyourlibrarytypeintheSpectra
Productcolumn.ThecurrentlyreleasedBlueScaleversionislistedinthe
Current Versioncolumn.
5. ComparetheCurrentVersionavailableforthelibrarytotheve rsion
installedonthelibrary.
6. IfamorecurrentversionoftheBlueScalesoftwareisavailable,
downloadandinstallit.SeeUpdatingtheBlueScaleSoftwareand
LibraryFirmwareonpage414fordetailedinstructions.
Notes:  DownloadtheBlueScalesoftwareupdatetoaUSBdevice
connectedtothecomputeryouareusingtoaccessthe
TechnicalSupportportal.Becausethelibraryisnotyet
configuredwithEthernetaccess,youmustperformthis
initialupdatefromtheUSBdevice.
 Ifyouhaveanyquestionsorconcernsaboutupdatingthe
BlueScalesoftware,contactSpectraLogicTechnicalSupport
(see
ContactingSpectraLogiconpage7).
Figure 33 The Product Software screen.
Important
Make sure that the filename for the BlueScale update package that you save to the
USB device has a.52z extension. If the file that you download has a .zip extension,
rename the file with a .52z extension. Do not unzip the downloaded file.