Spectra T50e - Page 90

Chapter 3—Introducing the BlueScale User Interface Using the BlueScale User Interface
August 2017 User Guide—Spectra T50e Library
90
5. ClickLogin.Thelibrary’sGeneralStatusscreendisplays.
Note: Ifyoupow ered‐onorresetthelibrary,theremaybeadelayafter
youclickLoginwhilethelibrarycompletesitsinitialization.When
theinitializationiscomplete,theGeneralStatusscreendisplays.
 Whentherearemessagestoreportatlogin,theBlueScaleuser
interfacedisplaystheMessagesscreenfirst.Readthemessagesand
takeactionasnecessary.
 Iftherearenomessagestoreport,theGeneralStatusscreen
displays.
6. ClickMENUtodisplaytheGeneralmenu.
7. Ifyouwanttoconfigureencryptionsettingsorkeys,selectSecurity >
Encryptiontologintotheencryptionfeature.SeeChapter10–
EncryptionandKeyManagement,beginningonpage282fordetailed
informationaboutconfiguringandusingeitherSpectraSKLMor
BlueScaleEncryptionkeymanagement.
Figure 50 The Messages screen.
Figure 51 The General Status screen.