ST STM32G473 User Manual

RM0440 Rev 4 2069/2126
RM0440 USB Type-C™ / USB Power Delivery interface (UCPD)
2079
46.7.5 UCPD status register (UCPD_SR)
Address offset: 0x014
Reset value: 0x0000 0000
The flags (single-bit status bitfields) are associated with interrupt request. Interrupt is
generated if enabled by the corresponding bit of the UCPD_IMR register.
Bit 4 HRSTDISCIE: HRSTDISC interrupt enable
0: Disable
1: Enable
Bit 3 TXMSGABTIE: TXMSGABT interrupt enable
0: Disable
1: Enable
Bit 2 TXMSGSENTIE: TXMSGSENT interrupt enable
0: Disable
1: Enable
Bit 1 TXMSGDISCIE: TXMSGDISC interrupt enable
0: Disable
1: Enable
Bit 0 TXISIE: TXIS interrupt enable
0: Disable
1: Enable
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res.
FRSEVT
TYPEC_VSTATE_CC2[1:0] TYPEC_VSTATE_CC1[1:0]
rrrrr
1514131211109876543210
TYPECEVT2 TYPECEVT1
RXERR
RXMSGEND
RXOVR
RXHRSTDET
RXORDDET
RXNE Res.
TXUND
HRSTSENT
HRSTDISC
TXMSGABT
TXMSGSENT
TXMSGDISC
TXIS
rrrrrrrr rrrrrrr

ST STM32G473 Specifications

General

Brand	ST
Model	STM32G473
Category	Microcontrollers
Language	English