Setup Data 5
Setup2 Editor 5.4
252
Further information:
Table Tools [-> 244]
File tools [-> 245]
Helpers for Input [-> 239]
Overview of the Setup2 Editor of the CMS [-> 237]
Setup Data [-> 233]
Comparing Setup1 to Setup2 [-> 235]
V Reduce carriage speed (n) for yarn
carrier (n = 0..3). The speed is reduced to
75% from carriage reversal point until
achievement of the operating range of
the yarn carrier. Finally it can be chosen
between the following possibilities:
1 = Acceleration up to 100%
2 = Braking down to 50%, maintain
speed over a fabric width of 2 inches,
acceleration up to 100%
3 = Braking down to 50%, maintain
speed over a fabric width of 5 inches,
acceleration up to 100%
0 = Cancelling out of carriage speed
specific to yarn carrier
Comment Comment ASCII Characters
Explanation Value range
To Next Page
Loading...
