Setup Data 5
Setup2 Editor 5.4
260
Further information:
Helpers for Input [-> 239]
File tools [-> 245]
Table Tools [-> 244]
Setup Data [-> 233]
Overview of the Setup2 Editor of the CMS [-> 237]
Comparing Setup1 to Setup2 [-> 235]
"Minimum width" Change the minimum width only if the error message "YLC:
deviation from set value of measuring wheel x too large" is
displayed.
Value range: - 2 E…0…+ 2 E (E = Number of needles per inch
= Gauge of the machine)
Example for E16: -32…0…+32 needles
: In the "Yarn length control" window execute again the
program item "Record original fabric" afterwards.
"Comment" Comment (ASCII Characters)
Explanation
To Next Page
Loading...
