12 Setting up the TI-Nspire™ Navigator™ Teacher Software
The software may display a message saying the access point firmware
needs to be updated. Click
Yes to update the access point firmware.
The next step is to add the TI-Nspire™ CX Wireless Network Adapters
or TI-Nspire™ Navigator™ Cradles to your classroom network. The
wireless adapters are used to communicate between the TI-Nspire™
CX handhelds and the access point. The cradles are used to
communicate between any of the TI-Nspire™ handhelds and the
access point. Both the wireless adapters and the cradles allow
teachers to communicate with the students’ handhelds to transfer
files, update the OS, and other actions.
Note: The TI-Nspire™ Network Manager wizard automatically guides
you through the process for adding wireless adapters or cradles. You
can automatically or manually add wireless adapters or cradles at any
time by following the procedures below.
Adding wireless adapters or cradles automatically
Before you use the auto-discover feature, make sure the TI-Nspire™
Navigator™ Cradles are charged.
1. Click
Auto-Discover Wireless Client(s).
2. Turn on each TI-Nspire™ handheld.
3. Attach the wireless adapter or the wireless cradle to each handheld.
(See the instructions below for connecting wireless adapters or
cradles to a TI-Nspire™ handheld.)
After a brief search for existing wireless adapters or cradles, a dialog
box opens, listing all adapters and cradles that were found.
To Next Page
Loading...
Need help?
General
