Texas Instruments TINSPIRE

16 Setting up the TI-Nspire™ Navigator™ Teacher Software
Connecting the handhelds to the cradles
The cradles work with the TI-Nspire™, TI-Nspire™ CAS, TI-Nspire™ CX
and TI-Nspire™ CX CAS handhelds. To connect the handheld to the
cradle, follow these steps.
1. Slide the lock on the back of the cradle to the OFF position.
2. To attach the handheld, face the screen upward and slide the
handheld onto the top of the TI-Nspire™ Navigator™ wireless cradle.
Be sure that both sides of the handheld are inserted into both of the
side guides.
Lock in OFF position.