Graphs & Geometry 527
3. Click once more to anchor the bisector on the work area.
Note: A segment can be one side of a triangle, rectangle, or a
polygon.
Bisecting an angle
1. From the Construction menu, select Angle Bisector.
Note: If no angle is present on the work area, you can create one by
selecting three different points.
2. Click to define the first side of the angle.
3. Click to define the vertex of the angle.
4. Click to define the second side of the angle.
Bisecting an existing segment (bisector not
anchored on page)
To Next Page
Loading...
