Data Collection and Analysis 715
Starting a new document
1. Best practices recommend closing all open documents. Save any open
documents, if desired, by selecting the document to be saved and
selecting
File > Save Document or press Ctrl + S.
Handheld: Press ~ then select File > Save or press / + S.
Save the document as a TI-Nspire™ document (.tns file) or as a
TI-Nspire™ PublishView™ document (.tnsp).
Important: PublishView™ is a special application of TI-Nspire™ that
is only available on the computer software.
Important: The handheld can only have one document open. If you
do not save you will be asked if you want to save before creating a
new document.
2. Select
File > New TI-Nspire Document or press Ctrl + N.
Handheld: Press c then select New Document.
3. Select the Vernier DataQuest™ application from the menu.
A new document is opened.
Adding a problem
You can add a new problem to an existing document. The new problem
page starts with the Vernier DataQuest™ default values and settings,
ensuring a “clean” start for this new problem.
1. Select
Insert > Problem.
Handheld: Press ~ then select Insert > Problem.
2. Select the Vernier DataQuest™ application from the menu.
To Next Page
Loading...
Need help?
General
