Data Collection and Analysis 793
2. Select one of the following:
• Print Current View
When printing, the current view is sent to the printer.
No other steps needed for setup.
• Print All Views
When printing, all three views (Meter, Graph, & Table) are sent to
the printer.
No other steps needed for setup.
•More
When printing, only the views selected are sent to the printer.
If More is selected:
– Activate the option boxes of the views to print.
– Click
OK.
The Print All settings are now complete and can be used when
printing.
The following image is an example of the More setting. In this
example, the Graph and Table view are set to print when Print All is
selected and the print command is executed.
Printing
Printing can only be performed on the computer.
1. Select
File > Print.
2. Select Print All from the Print What drop-down menu.
3. Complete any additional printing options you desire.
See the chapter Working with TI-Nspire™ Documents for information
about the other options.
4. Click
Print.
The following example shows the print dialog box with Print All selected.
To Next Page
Loading...
Need help?
General
