94
T1600G-52TS(config)# show logging local-config
13.11 show logging loghost
Description
The show logging loghost command is used to display the configuration of
the log host.
Syntax
show logging loghost [
index
]
Parameter
index
——The index of the log host whose configuration will be displayed,
ranging from 1 to 4. Display the configuration of all the log hosts by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of the log host 2:
T1600G-52TS(config)# show logging loghost 2
13.12 show logging buffer
Description
The show logging buffer command is used to display the log information in
the log buffer according to the severity level.
Syntax
show logging buffer [ level
level
]
Parameter
leve
l —— Severity level. There are 8 severity levels marked with values 0-7.
The information of levels with priority not lower than the select level will
display. Display all the log information in the log buffer by default.
To Next Page
Loading...
Need help?
General