TP-Link T1600G-52PS Cli Reference Guide

40
Syntax
show voice vlan oui
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Display the configuration information of Voice VLAN OUI:
T1600G-52TS(config)# show voice vlan oui
6.9 show voice vlan switchport
Description
The show voice vlan switchport command is used to display the Voice VLAN
configuration information of a specified port/LAG.
Syntax
show voice vlan switchport [ gigabitEthernet port | port-channel lagid ]
Parameter
port —— The Ethernet port number.
lagid —— The ID of the LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Display the Voice VLAN configuration information of all ports and LAGs:
T1600G-52TS(config)# show voice vlan switchport
Display the Voice VLAN configuration information of port 1/0/2:

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English