130
etime
—— The end moment of the daylight saving time, HH:MM.
offset
—— The number of minutes to add during the daylight saving time. It is
60 minutes by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the daylight saving time from 2:00am, the first Sunday of May to
2:00am, the last Sunday of Oct and the offset is 45 minutes:
T1600G-52TS(config)# system-time dst recurring first Sun May 02:00 last
Sun Oct 02:00 45
17.6 hostname
Description
The hostname command is used to configure the system name. To clear the
system name information, please use no hostname command.
Syntax
hostname [
hostname
]
no hostname
Parameter
hostname
—— System Name. The length of the name ranges from 1 to 32
characters. By default, it is the device name, for example “T1600G-52TS”.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the system name as TPLINK:
T1600G-52TS(config)# hostname TPLINK
To Next Page
Loading...
Need help?
General